Display description:

The display shows you the actual room temperature. A T with the number of degrees should be displayed here

If no T is shown on the display, press the button to change the view briefly until you reach T again.

There are also 3 other basic display values that could be shown: (RF) room humidity, (P) ambient air pressure and (TP) dew point temperature. Only the actual temperature (T) is important for cooling.

If you turn the wheel to the left to “-“, you will see by how many degrees the actual temperature should be cooled. Here you will see -1, -2, -3, -4, -5. The temperature can be cooled down by up to 5 degrees. The same happens if you turn the wheel to the right. Here you will then see +1, +2, +3, +4, +5. Here too, the temperature can be changed upwards by a maximum of 5 degrees.

In summer, the heating is switched off and only the surface cooling in the rooms works.

As soon as you have changed the desired temperature by the desired number of degrees, the surface and ceiling cooling starts to cool the room via the ceiling. The temperature adjustment you set takes place gradually and not from one second to the next. The room temperature on the display will therefore only update over time as soon as the desired temperature is reached.